Product Details:
Payment & Shipping Terms:
|
Contact Person: Mr.Castle Xiong
Phone:0086 13302809269
Email: sale@dhfaircond.com
10000 cfm evaporative cooler is suitable for high temperature or odor workshops, such as heat treatment plants, casting factories, plastic factories, aluminum profile factories, shoe factories, electroplating plants and chemical plants.
Evaporative air coolers are also suitable for workshops with dense workers, such as garment factories, assembly plants and assembly lines.
Large portable swamp coolers are often used in shopping malls, outdoor exhibitions/conferences, company/VIP reception areas, outdoor music festivals, open days, meet-and-greets, product launches, etc.
Evaporative air coolers are based on the physical principle of evaporative cooling, which converts outdoor warm air into cold air. The air volume of the air cooler can be selective, with 5000-100000 cubic meters per hour.
The characteristics of large air volume make the air cooler more conducive to the application of open and semi-open occasions.
A 1.1 kW evaporative air cooler can cover a 100 square meter plant. It consumes only 1.1 kWh of electricity per hour.
When the cooling system is not turned on, the temperature of the plant is higher than that of the outside due to sunlight shining on the building, heat dissipation of machinery and equipment, and human heat sources. Under normal circumstances, if the outdoor temperature is 32°C, the temperature inside the plant will reach 38°C when the air cooler is not turned on. After turning on the air cooler, the temperature in the plant can be cooled to about 28-30 °C. The perceived temperature reaches 27-29 ° C.
Evaporative air coolers are suitable for a variety of workshops or industrial places, such as textile workshops, garment factories, injection molding factories, hardware factories and electronics factories.
Portable evaporative air coolers are often used in shopping malls, outdoor exhibitions/conferences, company/VIP reception areas, outdoor music festivals, open days, meet-and-greets, product launches, etc.
Evaporative air coolers are divided into mobile and stationary types. Stationary air coolers are available for wall, roof and floor mounting.
Evaporative air cooler is suitable for high temperature or odor workshops, such as heat treatment plants, casting factories, plastic factories, aluminum profile factories, shoe factories, electroplating plants and chemical plants.
Evaporative air coolers are also suitable for workshops with dense workers, such as garment factories, assembly plants and assembly lines.
Portable evaporative air coolers are often used in shopping malls, outdoor exhibitions/conferences, company/VIP reception areas, outdoor music festivals, open days, meet-and-greets, product launches, etc.
An evaporative air cooler (also known as evaporative air conditioner, swamp cooler, swamp box, desert cooler and wet air cooler) is a device that cools air through the evaporation of water.
Evaporative cooling differs from other air conditioning systems, which use vapor-compression or absorption refrigeration cycles. Evaporative cooling exploits the fact that water will absorb a relatively large amount of heat in order to evaporate (that is, it has a large enthalpy of vaporization).
The temperature of dry air can be dropped significantly through the phase transition of liquid water to water vapor (evaporation). This can cool air using much less energy than refrigeration. In extremely dry climates, evaporative cooling of air has the added benefit of conditioning the air with more moisture for the comfort of building occupants.
According to the diameter of the honeycomb hole, the models of evaporative cooling pads are often divided into three types: 5090, 6090 and 7090. Type 5090 type cooling pad has the highest density and the largest evaporation area. At the same size, the 5090 model has a better cooling effect than the 7090 model.
The air cooler motor adopts copper wire coil. High-quality bearings are resistant to wear and corrosion.
This evaporative air cooler has a Bluetooth music function, which can play music with the Bluetooth of the device connected to the mobile phone.
There are two ways to add water: manual and automatic.
The LCD touchscreen control panel has the function of timing and speed regulation. The control panel can be controlled by a remote control.
A manual mechanical switch can adjust the wind speed. The mechanical model has a lower price.
Plastic dust screens filter dust and large particles. After installing the dust screen, the cleaning frequency of the evaporative air cooler is greatly reduced.
The diameter of the honeycomb hole of evaporative cooling pad is mainly 5mm, 7mm and 9mm. Among them, the 7mm specification (7090) is the most widely used, mainly used to make cooling pad panels installed on walls. The 5mm specification (5090) is mainly used in evaporative air coolers and industrial humidifiers. The 9mm specification is mainly used in places where there is too much dust and easy to clog.
The water pump uses copper wire cores and ceramic shaft cores.
